How Reset Ink Level on HP Deskjet 2135 Printer
There are three ways to reset the ink level on HP deskjet.
- Remove both the black and the color ink HP cartridges from your printer.
- Press the 'On' button on your printer to turn it on, wait 20 seconds, then turn it off. Allow the printer to completely turn off. Repeat this step five times so that the HP cartridge identification information will be erased from the printer's memory. HP printers normally store the identification information of the last five ink cartridges that were used. This will make the printer 'remember' the last 5 cartridges as 'none'.
- Insert back the cartridges inside the printer. Print a test page to ensure the cartridge level system is reset.
- Remove the cartridges and unplug the printer.
- Hold the power button on for 30+ seconds. Then release.
- Plug in printer and reinstall cartridges one at a time.
- Remove the cartridge and on the 2nd contact column from the left, place adhesive tape over the top contact in that column.
- Place the cartridge back into the printer. A message may show up that there is an issue with your cartridge. Ignore it. Print an alignment page.
- Take the same cartridge out of the printer when the alignment page is done.
- Do not touch or remove the tape that was originally put on the cartridge. Now grab adhesive tape and put it over the 2nd column from the right, on the top contact.
- Place the cartridge into the printer again. Let it be detected.
- Take the cartridge out of the printer one more time, and remove all adhesive tape.
- Put the cartridge back again into the printer. Print again an alignment page and the ink level should show full.
- Talk to experts to know more about Printers and resolve any issue instantly.
