Error 5B00 Printer Canon Pixma MX308

How to Solve Error 5B00 On Printer Canon Pixma MX308

Here's how to fix Error 5B00 Printer Canon Pixma MX308 :

• First, go to the Service Mode printer :

1. Turn off the printer
2. Press and hold the stop / reset
3. Press and hold the power button
4. Remove the Stop button / Reset, press 2 times the Stop / Reset (hold the power button)
5. Just off simultaneously, and then on your screen it says "Service Mode"
6. this time, you've made it into the "Service Mode"

• Once entered Service Mode menu, press the Stop / Reset 4 times
• Prepare paper in the paper tray Printer
• Press the Power button once, and then the paper will be printed by the printer
• Once the printer to print a single sheet, press the power button one time, to turn off the printer
• Turn on the printer
• Once the printer is powered on, there Menu Language on Your Printer LCD Monitor, choose according to your wishes (eg English), then there are Menu Country, choose according your country and if your country is not on the list, select "OTHER"
• Once this is done, test your printer to print a document, and if there is a notification back on your LCD screen, press the OK button that is under your LCD Monitor

Reset Ink Canon MX308

• Position the printer is off and the power cable is connected to the mains.
• Press and hold the reset button, then press the power button, while the button remains on hold resetnya
• Press the reset button 2x
• Release all buttons
• Wait until the Canon MX308 is idle and silent (Standby)
• Press the reset button 1x, then the Power button 1x
• And the Canon MX308 will print one page
• Then press the reset button 2x
• And the Canon MX308 will print one page again
• Press the reset button 3x
• Press the reset button 4x
• Turn off the printer Canon MX 308 by pressing the power.

Fixing "Absorber Full" on the printer Canon MX 308
Indications on the printer's LCD will be code 8B00

• Connect the power cord
• Press the STOP / RESET button (the printer is turned off)
• press the POWER button
• Remove the STOP / RESET
• Press the STOP / RESET 2x
• Release the Power button
• Put a sheet of A4 paper in the paper tray
• Press the STOP / RESET button 4x (POWER lamp and the alarm light will flash alternately every time the button is pressed)
• Turn off the printer by pressing the POWER button and turn it on again.
• The printer is ready to use ......
• Good luck.